mobile navigation
close buttonClose Menu
close buttonClose Menu


Electrical Safety Tips for Your Halloween Decorations

on October 6, 2017

Halloween haunts usually mean strings of decorative lights, fog machines, strobe and black lights, animatronics, electrically powered decorations and the list goes on. These things all add to the ambience of your haunt, but they also create the added dangers of fire, electrocution and other nasty and potentially disastrous accidents. It is very important that you look for and eliminate potential dangers from your Halloween lights and decorations that could lead to fires and injuries.

  • Carefully inspect each electrical decoration. Cracked or frayed sockets, loose or bare wires, and loose connections may cause a serious shock or start a fire. Discard damaged sets of lights or damaged props that can no longer be used safely.
  • Fasten outdoor lights securely to trees, house walls, or other firm supports to protect the lights from wind damage. Use only insulated staples to hold strings in place, not nails or tacks. Or, run strings of lights through hooks (available at hardware stores). Don’t staple or nail through light strings or electrical/extension cords – you could damage the wire or insulation, which could lead to an electrical shock or fire.
  • Don’t overload extension cords or allow them to run through water or snow on the ground. Before using any light strings, animated displays or other electrical products outdoors, make sure the product is approved by a nationally recognized certification organization and marked “for outdoor use”, i.e. UL Rated.
  • Use no more than three standard-size sets of lights per single extension cord. Don’t use electrical decorations or light strings on materials that could catch fire. It is important to turn off all electrical light strings and decorations before leaving home or going to bed. Follow the use and care instructions that accompany your electrical decorations.
  • Rule of thumb, most household circuit breakers are rated up to either ten or fifteen amps (you can tell by looking at the breakers themselves), and household current is generally 110 volts. Amps times volts equal the number of watts that a breaker can handle without tripping. With caution, learn what breakers protect each section of your home and label them. Don’t overload your circuit breakers/fuses.
  • For added electric shock protection, plug outdoor electric lights and decorations into circuits protected by ground fault circuit interrupters (GFCIs). Portable outdoor GFCIs can be purchased where electrical supplies are sold. GFCIs can be installed permanently to household circuits by a qualified electrician.
  • Turn off all lights when you go to bed or leave the house. The lights could short out and start a fire. Always have at least one fire extinguisher available and know how to use it. In homes with small children or animals, take particular care to avoid decorations that are sharp or breakable.

Call Mainstream today for a full home safety inspection to make sure your home is prepared for Halloween decorations! A full safety inspection of your home will identify issues in wiring, non-functioning safety systems, and damaged equipment that can compound failures later on.

Mainstream Electric, Heating, Cooling, & Plumbing is the leading provider of electrical services in the Greater Spokane area and North Idaho! Call today to schedule a quality electrical inspection at 866-411-9277. When you call before 8 AM, we’ll even arrive on the same day you schedule your service.

Choose Smart! Call the Company with Heart! 866-411-ZAPP (9277)

For more information on home and business electrical inspections, HVAC and furnace services, or plumbing service throughout Spokane and Coeur d’Alene, visit Mainstream Electric, Heating, Cooling, & Plumbing online.

Don’t forget to follow us on Facebook, Twitter, and Google+ for more useful electrical information and advice!